These Drivers & Utilities are designed to be used with blood glucose meters from Bayer and Bayer's data management software such as GLUCOFACTS® Deluxe and earlier versions.  If you are on a network, you will need administrative rights to your computer to install this cable.

Connect to the Computer

These steps only need to be performed the first time you use this USB Cable with your computer.  There are two drivers you need to install.  Both are include din the attached file.  This will take 2-3 minutes.

  • Download the drivers from here

  • Un-zip the file to your Desktop.

  • Remove the USB Cable from the package and plug the USB connector into the computer port.  This will start the Found New Hardware Wizard and those screens will appear on your computer display.

  • The wizard will guide you through the setup of USB drivers.

  • The Wizard will then repeat the steps to load the serial drivers onto your computer


Connect to your meter

Your blood glucose meter must be turned OFF
Completely insert the round metal end of the USB Cable into the meter.

After starting your software, turn your meter ON and proceed with the steps to receive meter data.  See the User Guide for more information on GLUCOFACTS® Deluxe.